Products
Basalt, Shale, Gneiss. Machined gantries, sealed motion, specs stated flat. Every image is a render of the production CAD; every number is from the acceptance report.
Basalt series
Enclosed CoreXY. The shop standard.
A sealed, actively heated build chamber on a machined 6061 gantry. Basalt runs engineering polymers all day and prints the thousandth part like the first.
| Motion system | CoreXY, linear rails on all axes |
| Build volume | 325 × 325 × 350 mm |
| Max speed | 600 mm/s |
| Acceleration | 20,000 mm/s² |
| Layer height | 0.05 – 0.32 mm |
| Hotend | Hardened steel, 300 °C |
| Chamber | Actively heated, 60 °C |
| Bed | Cast plate, 110 °C |
| Frame | Machined 6061-T6 aluminum |
| Repeatability | ±0.02 mm over 1,000 cycles |
| Noise | ≤ 48 dB(A) at full speed |
| Mass | 38 kg |
Shale series
Compact open-frame. Full motion pedigree.
The small bench machine that inherits Basalt's rails, extruder, and firmware. Nothing removed but the enclosure and 105 mm of travel.
| Motion system | CoreXY, linear rails on all axes |
| Build volume | 220 × 220 × 220 mm |
| Max speed | 500 mm/s |
| Acceleration | 16,000 mm/s² |
| Layer height | 0.08 – 0.32 mm |
| Hotend | Hardened steel, 280 °C |
| Bed | Cast plate, 100 °C |
| Frame | Machined 6061-T6 aluminum |
| Repeatability | ±0.03 mm over 1,000 cycles |
| Noise | ≤ 45 dB(A) at full speed |
| Mass | 17 kg |
Gneiss series
Industrial high-temp. Half-meter cube.
A 90 °C chamber, a 350 °C hotend, and 125 liters of build volume on a twin-column frame. For the parts that used to be someone else's machining quote.
| Motion system | CoreXY, twin-column Z, ball screws |
| Build volume | 500 × 500 × 500 mm |
| Max speed | 400 mm/s |
| Acceleration | 12,000 mm/s² |
| Layer height | 0.10 – 0.60 mm |
| Hotend | Hardened steel, 350 °C |
| Chamber | Actively heated, 90 °C, HEPA filtered |
| Bed | Cast plate, 120 °C |
| Frame | Welded steel, machined interfaces |
| Repeatability | ±0.02 mm over 1,000 cycles |
| Power | 230 V, 16 A |
| Mass | 142 kg |
Stratafil
Dried, vacuum-sealed, wound to ±0.02 mm. Swatches are rendered material chips — the polymer's optical character, not a stock macro shot.
Low-sheen PLA that hides layer lines and photographs like machined nylon. Dried, vacuum-sealed, wound to ±0.02 mm.
Basalt Black · Paper Gray · Kiln Orange · Glacier White
| Diameter | 1.75 mm ± 0.02 |
| Spool | 1 kg, cardboard core |
| Nozzle | 195 – 225 °C |
| Bed | 45 – 60 °C |
| Density | 1.24 g/cm³ |
| Tensile strength | 46 MPa |
The fixture-and-bracket workhorse. Prints clear-edged at speed and shrugs off UV, water, and being dropped on concrete.
Translucent Smoke · Basalt Black · Signal Amber
| Diameter | 1.75 mm ± 0.02 |
| Spool | 1 kg, cardboard core |
| Nozzle | 230 – 250 °C |
| Bed | 70 – 85 °C |
| Density | 1.27 g/cm³ |
| Tensile strength | 50 MPa |
UV-stable styrenic for housings and end-use outdoor parts. Wants an enclosure; rewards you with a part that still looks new in year three.
Basalt Black · Machine Gray · Safety Orange
| Diameter | 1.75 mm ± 0.02 |
| Spool | 1 kg, cardboard core |
| Nozzle | 240 – 260 °C |
| Bed | 90 – 110 °C |
| Chamber | 50 °C recommended |
| Density | 1.07 g/cm³ |
| Tensile strength | 44 MPa |
15% chopped carbon in a dried PA12 base. Stiff, dimensionally calm, and dark enough to pass for injection molding. Hardened nozzle required.
Carbon Black
| Diameter | 1.75 mm ± 0.02 |
| Spool | 500 g, sealed with desiccant |
| Nozzle | 270 – 300 °C, hardened |
| Bed | 90 – 110 °C |
| Chamber | 60 °C recommended |
| Density | 1.17 g/cm³ |
| Tensile strength | 98 MPa |
Accessories
0.25 / 0.4 / 0.6 mm hardened steel nozzles, machined in-house, plus the torque wrench set to the number we use on the line.
| Bores | 0.25 / 0.4 / 0.6 mm |
| Material | Hardened tool steel, 58 HRC |
| Thread | V6-compatible M6 |
| Max temp | 500 °C |
| Includes | Torque wrench, 1.5 N·m preset |
Double-sided spring steel with powder-coated PEI. The stipple face leaves a uniform matte first layer; flex it once and the part is off.
| Sizes | Basalt 325, Shale 220, Gneiss 500 |
| Base | 0.5 mm spring steel |
| Surface | Powder-coated PEI, both faces |
| Max bed temp | 120 °C |
Heated, desiccant-assisted storage with feed-through ports. Nylon that has lived in a D1 prints like nylon from the datasheet.
| Capacity | 4 × 1 kg spools |
| Humidity | 12 – 15% RH maintained |
| Drying | 45 – 70 °C, timed cycles |
| Feed-through | 4 PTFE ports |
| Display | RH / temp, per-bay |
Rail grease, wipes, spare belts cut to length per machine, a bag of the fasteners people lose, and the schedule card from the manual.
| Belts | 2 × 2 mm-pitch glass-corded, machine-specific |
| Grease | NLGI 2 lithium, 50 g |
| Wipes | IPA, 40 count |
| Fasteners | M3/M4 assortment, 60 pcs |